Fast Rear ATV Tie-Down System
Installation and User Instructions

1. Read and understand all instructions before installing and/or using product. NEVER allow anyone unfamiliar with the instructions or ATV to use this product.

2. Read and understand all instructions provided by the manufacturer of the product that this Rear ATV Tie-Down System will be installed on.

3. Installation of the Rear ATV Tie-Down System must conform to the following mounting instructions only.

4. Vinny Enterprises, Inc. is not responsible for accidents, occurrences, injuries and losses to or of any person or property, wherever which arises as a result of Purchaser’s alteration, modification, assembly, reassembly or installation of this product.

Application

-ATV MUST have a ball hitch on rear of ATV. (Any size ball will work)

Initial Set Up

Bolt Down / Height adjustment

- Using one1/2 inch nut and bolt fasten system to trailer near rear of ATV.
-Some trailers will require a reinforcement mount plate under trailer. (included)
- Using a 7/16 wrench and Phillips screw driver adjust height so that in the unlocked position the Fast Rear ATV Tie-down fits just over the ball hitch of ATV.

Lock

-Insert a pin or pad lock into hole that goes through middle hole in lock handle.
-Rear Tie-Down System must be locked or secured with pin.

Unlock

-Remove lock or pin.
-Flip lock handle up and fold down releasing ATV from Rear Tie-Down System.

Warnings

-Approach clamp at a very low speed to prevent damage to clamp and vehicle.
-Always use pin or lock to secure device.
-This system was designed for use in conjunction with a tie-down in front of ATV, do not use as sole tie-down for ATV.

Vinny Enterprises, Inc. will not be responsible for: (I) Physical abuse of goods or any component or acts of vandalism by any person after purchase (II) alterations, modifications, additions, or repairs made after purchase (III) improper installation or use contrary to instruction; or (IV) accidents or damage after purchase.